EPM-BA Lifting magnets are the professional solution for the frequent turning of workpieces. They are very robust and designed for continuous use. The electrical control allows the operator to switch the unit without physical exertion and hard to reach areas. The permanent magnet system is activated by pressing a button in just 0.8 seconds, and when you turn off, the workpiece is released safely. The connection is made simply on mains voltage. Thus, the device is ready for use with very low installation effort. When the mains fails, the load is held by the permanent magnet field. Thus no prone and maintenance-intensive back-up batteries are necessary. A quick change of crane installations with conventional mains-powered electromagnet is possible. EPM-BA Lifting magnets comply with the latest standards and offer the maximum safety and ease of use. With our standard sizes up to 4500kg we have the right device for almost any application.


EPM-BA 400 + EPM-BA 500

A maximum lifting capacity of 500kg, which are achieved at a material thickness of 15mm and a small magnetic sensing face the magnets recommends EPM-BA 400 and 500 for lifting and moving of small and medium-sized, solid steel parts.


Datasheet

 

 

 

 


EPM-BA 1000

A maximum lifting capacity of 1000kg, which can be reached with a material thickness of 25mm, and a magnetically active area of ​​170x170mm, the EPM-BA 1000 is recommended for lifting and moving of massive workpieces such as forgings, flame cuts, Standards and Tools.


Datasheet

 

 

 

 


EPM-BA 1250 + EPM-BA 2000

A maximum lifting capacity of 1250/2000kg, which is achieved with a material thickness of only 15mm and a magnetically active area of ​​380x120mm (EPM-BA 1250) or 640x120mm (EPM-BA 2000), the recommended EPM-BA 1250/2000 for lifting and moving of carriers, profiles and especially square pipes. As early as 4mm thickness, a large format sheet safely and according to standards can be lifted.

Datasheet

 

 

 

 


EPM-BA 2500 + EPM-BA 3300

A maximum lifting capacity of 2500/3300kg, which can be achieved with a thickness of 25/35mm EPM-BA 2500/3300 can almost do everything. Massive parts and large-format plates up to max. 3000x1500x70mm can be lifted quickly and safely.

Datasheet

 

 

 

 


EPM BA 4400 + EPM BA 4500

A maximum lifting capacity of 4400/4500kg, which can be reached with a material thickness of 25mm and staggered to the edge of controls to EPM-BA suitable 4400/4500 specifically for loading and clearing of laser and torch cutting tables and for handling of long, narrow workpieces such as carriers and construction units.

Datasheet