Product description
MH permanent magnetic clamping blocks have 2 or 3 magnetic clamping surfaces which are not switchable. They are used for clamping very fine parts or materials that are difficult to magnetize, such as high-alloy chrome steel or carbide. After machining, the block with the clamped workpiece can be completely removed from the machine for inspection purposes. MH clamping blocks are available in standard and reinforced (with SE magnets) versions. The main areas of application are in grinding, measuring and wire cutting.
Make an inquiry
Technical data
| Product number: | 2306 16 |
|---|---|
| Clamping surfaces: | 1 |
| Dimension height (mm): | 20 |
| Dimension length (mm): | 150 |
| Dimension width (mm): | 80 |
| Nominal holding force (N / cm²): | 180 |
| Pole pitch (mm): | 5,5 |
| Weight (kg): | 2,4 |
MHS 6
MH permanent magnetic clamping blocks have 2 or 3 magnetic clamping surfaces which are not switchable. They are used for clamping very fine parts or materials that are difficult to magnetize, such as high-alloy chrome steel or carbide. After machining, the block with the clamped workpiece can be completely removed from the machine for inspection purposes. MH clamping blocks are available in standard and reinforced (with SE magnets) versions. The main areas of application are in grinding, measuring and wire cutting.
| Product number: | 2306 16 |
|---|---|
| Clamping surfaces: | 1 |
| Dimension height (mm): | 20 |
| Dimension length (mm): | 150 |
| Dimension width (mm): | 80 |
| Nominal holding force (N / cm²): | 180 |
| Pole pitch (mm): | 5,5 |
| Weight (kg): | 2,4 |
Documents
Downloads
Suitable files to download
Suggested products
