Product description
Permanent magnetic circular chucks type RN with neodymium magnet system and low overall height are used for clamping small workpieces with sufficient material thickness, especially for grinding and assembly work. In all steel poles can be drilled 15mm deep. A centering hole max. 22x5mm or a thread M8x12mm can be inserted.
Structure
- Neodymium magnet system, steel base body
- Pole pitch 8+3mm
- Nominal holding force approx. 80 N/cm2
- Magnetic field height approx. 6mm
- Pole plate wear 8mm
- Switching distance MAG - ENT-MAG 180°
Recommendation
Strong round chuck in flat design
Technical data
| Product number: | 2104 13 |
|---|---|
| Borehole: | 4 x M6 |
| Dimension C (mm): | 90 |
| Dimension D (mm): | 2,5 |
| Dimension E (mm): | 120 |
| Dimension height (mm): | 50 |
| Dimension outer diameter (mm): | 130 |
| Nominal holding force (N / cm²): | 80 |
| Pole pitch (mm): | 8+3 |
| Weight (kg): | 5 |
| max. speed (RPM): | 800 |
Permanent magnetic circular chucks type RN with neodymium magnet system and low overall height are used for clamping small workpieces with sufficient material thickness, especially for grinding and assembly work. In all steel poles can be drilled 15mm deep. A centering hole max. 22x5mm or a thread M8x12mm can be inserted.
Structure
- Neodymium magnet system, steel base body
- Pole pitch 8+3mm
- Nominal holding force approx. 80 N/cm2
- Magnetic field height approx. 6mm
- Pole plate wear 8mm
- Switching distance MAG - ENT-MAG 180°
Recommendation
Strong round chuck in flat design
| Product number: | 2104 13 |
|---|---|
| Borehole: | 4 x M6 |
| Dimension C (mm): | 90 |
| Dimension D (mm): | 2,5 |
| Dimension E (mm): | 120 |
| Dimension height (mm): | 50 |
| Dimension outer diameter (mm): | 130 |
| Nominal holding force (N / cm²): | 80 |
| Pole pitch (mm): | 8+3 |
| Weight (kg): | 5 |
| max. speed (RPM): | 800 |